How do you perform a New Construction Cleaning?

What is a "new construction" cleaning? It's basically a deep clean of a new-built home or business. You may be thinking about what the significance of this is given that everything looks brand-new already. It's a method to remove all dirt or grime prior to them taking hold. If you can ensure that there aren't any stain marks on floors made of plywood or painted walls, you will be able to safeguard your investment. This protects surfaces from future damage such as rusting metal trims on windowsills or door jambs.

 

Cleaning Materials Required

Vacuum cleaner: To remove any dust particles left behind by woodworking tools like table saws or jointers. The vacuum should be used to soak away all chalk lines, and any leftover sealant. Make sure you vacuum the steps, the edges of windowsills, the edges of baseboards, etc. When you're done you can sweep the floor once more to remove any debris.

Broom, dustpan, and brush: Pick up sawdust and other particles that have accumulated in the corners or in difficult-to-access areas. Get rid of any debris, such as sawdust.

Baking Soda: Baking soda is great for removing odors on any surface. Baking soda is also able to neutralize the smells that come from sealants, paints, and stains in new construction cleaning. Use mops to scrub baking soda onto damp floors.

Bleach: Bleach is an excellent cleaner for killing any mold and mildew. Be sure to mix the bleach with water in line with the instructions on the label as excessive bleach could be harmful. Bleach is also great for getting rid of grease stains and soap scum left on tiles after new construction cleaning.

Sponges: Keep a bucket of water warm and do not forget to squeeze the sponges entirely prior to using them. Make use of sponges to clean up construction adhesive and grime. Use it on doors, cabinets, and other surfaces.

Polish: Polish is a method of removing fingerprints and dirt from newly painted walls. Make a paste with baking soda and water to polish cabinets, appliances, and tiles.

Mop, bucket, and squeegee: Mop the floor after vacuuming. Clean the sides of windows and doors with a squeegee to pull out water from them. Make use of a mop that's been dipped in warm soap and water to wash away any water that is left. Use the squeegee for removing streaks of water from floors, walls, or any other surface.

Dust cloths Cleanse mirrors and windows. It is also possible to use dust cloths on small objects and things that are too delicate to use a mop or sponge on.

Rubber gloves: Use cleaning agents that are incorporated into rubber gloves to keep your hands from becoming irritated. Also, make sure you don't let any chemicals into your skin.

Protective equipment: Keep your eyes clear from dirt and dust with a pair or rubber gloves, boots, or goggles that are made of latex. To block out noises that are too to your ears, you can wear a mask for dust or earplugs.

 

Do it Yourself

These steps will make your new construction site look neat and tidy.

The first step is to check your windows to make sure they're properly sealed and that they do not are cracked. If there are cracks in the window glass or frame it is necessary to replace it as soon as possible because the water may get inside and cause mold to grow. It is also important to inspect any metal trim around the windows, including sill plates and doorjambs for moisture damage. If necessary, remove this trim and repaint it with an appliance paint like Rust-Oleum Filler Primer. It is crucial to clean these surfaces, and also protect them from future corrosion caused by infiltration of moisture under the surface of things such as wooden sills/jambs that might rot over time.

After that, check the doors for gaps or cracks around their edges. This can allow air to enter and lead to a loss of energy. You should also look at the flooring beneath the door to ensure that there aren't any gaps between the threshold and the door. If necessary, make use of a caulk gun (or non-hardening weather sealant) to fill the gaps using silicone-based putty. Every entrance to your building or home should be inspected, including exterior and interior sliding glass doors. Repeat the process for both sides of the windows. The final step is to seal every doorway. If you can fit your finger inside the crack, seal it.

After that, examine paintwork on the exterior for nicks or chips which could cause rust spots. Make use of a putty knife or a weather sprayer that is not hardening to apply touch-up paint if necessary. Be sure there aren't any seams between sheets of sheetrock. these should first be filled with joint compound, then painted with primer or paint. Give all flooring, tiled or carpeted, a thorough clean with an industrial vacuum cleaner, such as one that's a shop vacuum. After they've been cleaned, check each for any damage like cracks in the grout or nicked edges. Apply spackle (or non-hardening weather sealant), to these areas with a putty knife. It should dry for 24 hours prior to applying the last coat.

Then, look over the surfaces for any scratches or smudges. If needed, apply a wet rag to clean off dust particles, then apply primer/paint using a bent brush. You should pay special attention to the areas surrounding doorknobs or fixtures, as these are high-traffic areas where dirt could get caught. The primer color matches closely so you won't notice it after the walls have been painted.

Then, examine all carpeted and tiled floors for cracks or damage which could cause tiles to loosen over time. Use a putty knife or a sealant that is not hardening to repair cracked tiles. Once it's dried and then, you can paint it with primer or paint using an angle brush. Also, clean the vents with a vacuum within the house and under the outside of each vent where they connect to the outside on top of the building to prevent insects from getting in and creating nests. You should also cover the AC unit with plastic sheets until you are ready to inspect the unit. This is due to the fact that it could cause damage if not covered.

It's also a good idea to cover the entire exterior of the structure with plastic sheeting before final inspection. You can do this by using large sheets secured with tape along seams and then draped over the protected area. Do not use duct tape since it could cause damage to siding or brick. After you are done, place cones around your home or building, and wait for the report of the inspector. In the event that any repairs require to be cut out of the sheeting material on the bottom where required so you can access the underneath when all is done. Be sure to keep everyone out of the way prior to getting the windows or doors; otherwise, they may be injured by nails sticking from the planks of scaffolding!

 

Cleaning dust from new construction

 

When you are faced with cleaning up a new construction You must be aware of the proper techniques. If you need help this list of tips should provide all the needed information!

- Remove any debris from every room. Mop and sweep hardwood floors and tile surfaces prior to moving on to carpeted areas to ensure they don't become saturated to clean later in the procedure. Be sure your vacuum has a hose attachment for more efficient vacuuming of dust bunnies around walls and other spaces where dirt can accumulate over time.

- Next, move on to washing windowsills, sills over doors and windows, or any window panes that appear to be containing visible dust. This is an essential step in clean-up after construction because if you don't get the windowsills and other surfaces that are near, there will be plenty of dirt accumulation over the course of time.

- After completing these steps, you can move on to cleaning your walls using an all-purpose cleaner as well as paper towels or microfiber rags to dry them easily afterward. To ensure that carpets do not become saturated, use smaller amounts of water throughout the process. Then, you can vacuum them up later after they have dried completely of any moisture that might have fallen down during the cleaning process.

- When you are done, take the vacuum out and go around each area, sucking up any debris from each carpeted area. If the floors are filthy, you may even want to sweep them once more to get a cleaner effect before moving on to the next stage of this procedure, which involves cleaning the windows to remove any build-up dust.

- Once you have completed all the above steps and you are now ready for mopping your floors one more time to make them tidier and make sure there's no dust left on top of floor surfaces.

- Check that everything is dried before moving on to your personal belongings or clothes in any space. This will help prevent damage caused by moisture that may remain in carpets. This would defy the entire reason to work hard during new construction cleaning!

Employing a professional cleaner is a good alternative if you're short on time. They're experienced and can offer their expertise. Reviews on the internet are the best way to find a reliable firm. Talk to the company in-person to inquire about their offerings and determine if you're a good match.

Contact NW Maids to learn more: https://nwmaids.com

 

Contact the NW Maids Portland location:

NW Maids House Cleaning Service of Portland

5020 NE Martin Luther King Jr Blvd, 

Portland, OR 97211, United States

503-710-9674

https://nwmaids.com/locations/portland

https://www.google.com/maps?cid=6615656981506305502