Plumbing Tips That Will Greatly Help You Out

If plumbing is something that can have you stumped, you probably know how expensive it is to have it done professionally. You also may have to wait for a plumber to arrive when there's a problem happening now! Don't let this happen, read on for tips on solving your own plumbing problems!

Learn More

 

 

If you have noisy pipes that sound like hammering or squeaking, this is something that is easy to fix. Anchor any easily-accessible loose pipes. Call a plumber to help with pipes that require you to cut a hole in a wall, ceiling or floor.

 

Before starting any plumbing project be sure to turn off the main water supply. Water damage can be one of the most expensive things to repair. To minimize damage turn the main water supply off as well as any shut off valves near where you are working. This will save a great deal of hardship later on.

 

Do not fall for the idea that liquid grease can be easily washed down the drain with hot water. While the grease may flow past the initial drain with the water, it does not take much of a temperature change as it moves through your pipes to alter from liquid to solid. The repeat habit of dumping grease in the sink is a sure-fire way to ensure a hard-to-reach clog forming in the future.

 

To avoid having your outdoor faucets freeze up in the winter, detach all hoses before the first freeze. Also, close the shutoff valve that leads to the outdoor faucets, then turn on the outdoor faucets to let any remaining water in the lines drain. Once temperatures warm up in the spring, you can reverse the process.

 

At least once a year remove the faucet aerator and clean the screens. This helps it properly function. The function of a faucet aerator is to allow for an even flow of water and to conserve water. Be sure to clean out the aerator and you'll notice a these things working.

 

Drain the sediment from the bottom of your hot water heater twice a year to keep the hot water heater working at its optimal levels. Simply open the drain valve and allow the water to run out into a bucket until the water runs clear. Then close the drain valve.

 

Clean the aerator to fix low water pressure issues that are caused by the buildup of sediment. After removing the aerator, disassemble it, and use a small brush that's been dipped in vinegar to clean it. After the aerator is thoroughly cleaned, rinse it under clear water, put it back together, and attach it to your faucet again. Removing obstacles in aerators should improve the water pressure.

 

As you can see, there's no reason to pay so much just to wait for a plumber to come and fix a problem that you could be working on yourself. Applying the tips in this article can save you time and money next time your plumbing needs to be repaired.